Language Selector
| Español |
| Deutsch |
| 中文 (Greater China) |
| 日本語 (Japan) |
| 한국어 (Korea) |
Products
8-port 10 Gigabit Ethernet Line Card
(C-Series Line Card)
- Up to 64 10 GbE ports
in a single
chassis - Line-rate, non-blocking
performance
8-port 10 Gigabit Ethernet Line Card
The 8-port 10 GbE line card for the Force10 C-Series C150 and C300 with pluggable XFP modules, supports distances of up to 80km. This card provides a flexible solution for applications spanning the LAN, MAN, and WAN.
This line card provides industry-leading density of up to 64 line-rate, non-blocking 10 Gigabit Ethernet ports in a single chassis. Additionally, the C-Series ASICs and architecture enables line-rate performance with QoS and Access Control Lists (ACLs) enabled, jumbo frame support, and simultaneous L2 switching and IPv4 routing. The intelligence embedded in the line cards allows localized switching, providing very low latency.
Key Features
- Full line-rate throughput for Ethernet frames from 64 byte to 9,252 byte
frames on all ports regardless of features enabled - Pluggable XFP modules providing support for SR, LR, ER, ZR, DWDM
and CX4 interfaces - 5 microsecond switching latency under full load for 64 byte frames
- Per-port status and activity LEDs
8-port 10 Gigabit Ethernet Line Card
Physical
- Eight full-duplex 10 Gigabit Ethernet ports with pluggable XFP modules
- Occupies a single slot in the Force10 C150/C300 chassis
- Dimensions
- 15.25 x 13.75 x 1.75"
(38.735 x 34.925 x 4.445 cm)
- 15.25 x 13.75 x 1.75"
- Weight
- 5.585 lbs (2.533 kg)
- Power dissipation:
- 200W maximum
Maximum Operating Specifications
- Temperature:
- 32° to 104°F
(0° to 40°C)
- 32° to 104°F
- Altitude:
- No performance
degradation to
10,000 ft (3,048 m)
- No performance
- Relative humidity:
- 5 to 85 percent,
non-condensing
- 5 to 85 percent,
- Shock:
- Bellcore GR-63
- Vibration:
- Bellcore GR-63
Maximum Non-Operating
Specifications
- Temperature:
- -40° to 158°F
(-40° to 70°C)
- -40° to 158°F
- Maximum altitude:
- 15,000 ft (4,572 m)
- Relative humidity:
- 5 to 95 percent,
non-condensing
- 5 to 95 percent,
- Vibration:
- Bellcore GR-63
Management
- Link status and link activity LED per port
- Status LED per line card
- Onboard diagnostic capability
IEEE Specifications
- 802.1AB Link Layer Discovery Protocol
- 802.1D Bridging, STP
- 802.1p L2 Prioritization
- 802.1Q VLAN Tagging, Double VLAN Tagging, GVRP
- 802.1s Multiple Spanning Tree Protocol
- 802.1w Rapid Spanning Tree Protocol
- 802.1X Network Access Control
- 802.3ac Frame Extensions for VLAN Tagging
- 802.3ad Link Aggregation with LACP
- 802.3ae 10 Gigabit Ethernet
- 802.3ak 10 Gigabit Ethernet (10GBASE-CX4)
- 802.3x Flow Control
- 9252 byte MTU
Safety
- CUS 60950
- CSA 60950
- CE Mark (EN 60950)
- CB Report, all country deviations
EMC
- USA: FCC Part 15, Class A
- Canada: ICES-003 Class A
- Europe: EN55022 1988, Class A
- Japan: VCCI Class A EN55024 1998
XFP Support
Any combination of Force10 SR, LR, ER, ZR, DWDM and CX4 XFPs may be populated. XFP modules are sold separately.
RoHS Compliance
All C-Series components are EU RoHS compliant with the exception of lead, which is exempt from the directive for network equipment.
Ordering Information
- Order Number
- Description
- LC-CB-10G-8P
- 8-port 10 GbE line
card – XFP modules
required
(series CB)
- GP-XFP-1S
- Qualified SR/SW 10 GbE XFP optics module, LC connector
- GP-XFP-1L
- Qualified LR/LW 10 GbE XFP optics module, LC connector
- GP-XFP-1E
- Qualified ER/EW 10 GbE XFP optics module, LC connector
- GP-XFP-1Z
- Qualified ZR/ZW 10 GbE XFP optics module, LC connector
- GP-XFP-W
- Qualified DWDM
10 GbE XFP optics
module, LC connector
(100 GHz ITU grid, C-Band)
- GP-XFP-1CX4
- Qualified CX4 10 GbE XFP module
- Optics
- See Optics Specifications for more details.
Downloads
Datasheet
Last updated: 1/21/2008 12:58:32 PM