Products

Products Home
FTOS
E-Series
E-Series Line Cards
C-Series
C-Series Line Cards
S-Series
P-Series
Media Specifications
Testing Reports
Network Management
Customer Profiles
Testimonials
White Papers
Force10 Images/Photos
Force10 EULA

 

Contact Our Sales Team
    +1 866 600 5100
    +1 408 965 5100

48-port 10/100/1000Base-T PoE Line Card
(C-Series Line Card)

48-port 10/100/1000Base-T PoE Line Card
  • Up to 384 10/100/1000Base-T PoE ports in a single chassis
  • Line rate, non-blocking performance
Overview
Specifications
Line Cards
f10
 

48-port 10/100/1000Base-T PoE Line Card

 

The 48-port 10/100/1000Base-T line card for the Force10 C-Series C150 and C300 provides IEEE 802.3af PoE support. Using intelligent power management each chassis can provide up to 15.4W of power per port, while maintaining full system and PoE power supply redundancy.

This line card provides industry-leading density of up to 384 line-rate, non-blocking 10/100/1000Base-T Ethernet ports with PoE in a single chassis. Additionally, the C-Series ASICs and architecture enables line-rate performance with QoS and Access Control Lists (ACLs) enabled, jumbo frame support, and simultaneous L2 switching and IPv4 routing. The intelligence embedded in the line cards allows localized switching, providing very low latency.

Key Features

  • Full line-rate throughput for Ethernet frames from 64 byte to 9,252 byte
    frames on all ports regardless of features enabled
  • Intelligent power management with PoE (IEEE 802.3af) support, provides
    Class 3 inline power of 15.4 Watts per port
  • Integrated Time-Domain Reflectometry (TDR) to easily monitor and isolate
    faults on copper wiring infrastructure
  • 5 microsecond switching latency under full load for 64 byte frames
  • Auto-negotiation, auto-MDI/MDIX and per-port status and activity LEDs

48-port 10/100/1000Base-T PoE Line Card Specifications

 

Physical

  • 48-port full duplex 10/100/1000Base-T with RJ-45 ports with PoE
  • Occupies a single slot in the Force10 C150/C300 chassis
  • Dimensions:
    • 15.25 x 13.75 x 1.75"
      (38.725 x 34.925 x 4.445 cm)
  • Weight:
    • 5.585 lbs (2.533 kg)
  • Power dissipation:
    • 150W maximum

Maximum Operating Specifications

  • Temperature:
    • 32° to 104°F
      (0° to 40°C)
  • Altitude:
    • No performance
      degradation to
      10,000 ft (3,048 m)
  • Relative humidity:
    • 5 to 85 percent,
      non-condensing
  • Shock:
    • Bellcore GR-63
  • Vibration:
    • Bellcore GR-63

Maximum Non-Operating
Specifications

  • Temperature:
    • -40° to 158°F
      (-40° to 70°C)
  • Maximum altitude:
    • 15,000 ft (4,572 m)
  • Relative humidity:
    • 5 to 95 percent,
      non-condensing
  • Vibration:
    • Bellcore GR-63

Management

  • Link status and link activity LED per port
  • Status LED per line card
  • Onboard diagnostic capability

IEEE Specifications

  • 802.1AB Link Layer Discovery Protocol
  • 802.1D Bridging, STP
  • 802.1p L2 Prioritization
  • 802.1Q VLAN Tagging, Double VLAN Tagging, GVRP
  • 802.1s Multiple Spanning Tree Protocol
  • 802.1w Rapid Spanning Tree Protocol
  • 802.1X Network Access Control
  • 802.3ab Gigabit Ethernet (1000BASE-T)
  • 802.3ac Frame Extensions for VLAN Tagging
  • 802.3ad Link Aggregation with LACP
  • 802.3af Power over Ethernet
  • 802.3i Ethernet (10BASE-T)
  • 802.3u Fast Ethernet
    (100BASE-TX)
  • 802.3x Flow Control
  • 9252 byte MTU

Safety

  • CUS 60950
  • CSA 60950
  • CE Mark (EN 60950)
  • CB Report, all country deviations

EMC

  • USA: FCC Part 15, Class A
  • Canada: ICES-003 Class A
  • Europe: EN55022 1988, Class A
  • Japan: VCCI Class A
  • EN55024 1998

RoHS Compliance

All C-Series components are EU RoHS compliant with the exception of lead, which is exempt from the directive for network equipment.

Ordering Information

 
  • Order Number
  • Description
  • LC-CB-GE-48V 
     
  • 48-port 10/100/1000Base-T line card with RJ45 interface with PoE (series CB)
 

 

 

 

 
 
back to top > Last updated: 1/21/2008 1:05:42 PM
Downloads
Datasheet